MULTIS 400+
MULTIS 400+
The reinforced composite PVC formwork board, designed for 400+ reuses.
One board.
Longer life.
Better finish.
MULTIS 400+ is a reinforced composite PVC formwork board engineered for high-cycle concrete construction in demanding site conditions.
Designed for 400+ reuse cycles, it maintains dimensional stability and surface consistency across repeated pours.
◼
MADE TO ORDER
For PERI. Doka. MEVA. ULMA and more
◼
UP TO 6,000 mm
2,050 mm wide • 10-23 mm thick
◼
TESTED BY SGS
Independent material testing
◼
PROVEN ON SITE
Used on live projects
Stable surface.
Predictable results.
MULTIS 400+ is made for both exposed architectural concrete and infrastructure work, where the finish has to look consistent across every pour.
▪ No irregularities when used in a panel
▪ No formwork-related discolouration
▪ Clean joints between elements
MULTIS 400+ FINISHES INCLUDE:
NSCS Edition 5
8.7.1 Plain and special finishes
F3 — F7
Highway finish requirements
C.E.S.W. Specifications
Civil Engineering Specification for the Water Industry
-
![Concrete staircase inside a building with unfinished walls and metal handrails.]()
▪ FLOOR 1 FINISH
Level 1 using MULTIS 400+
-
![Under construction interior with exposed concrete ceiling, yellow safety lines, and scaffolding near large windows.]()
▪ FLOOR 9 FINISH
Level 9 using MULTIS 400+
-
![Concrete staircase with black metal railing inside a building under construction.]()
▪ FLOOR 1 JOINT
Floor 1 joint using MULTIS 400+
-
![Construction site showing unfinished ceiling with exposed concrete, electrical wiring, and metal supports near large glass windows and doors.]()
▪ FLOOR 9 JOINT
Floor 9 joint using MULTIS 400+
BUILT FOR REAL SITES.
Built to be reused.
Designed for 400+ reuses†.
8x+ more pours than Scandinavian phenolic-faced birch plywood*
Excellent plasticity and bendability for on-site use
Consistent concrete surface finish across repeated pours
Reinforced PVC composite core
Where the savings come from.
No release agent required in standard applications
Quick cleaning between pours
Faster turnaround between uses
Cost spread over hundreds of pours
Less labour. Less waste.
Lower cost.
No swelling or delamination.
Low water absorption <0.1%
Withstood 1,000 bar pressure washing x15 minutes in SGS testing
Unaffected by wet and cold site conditions
Anti-termite
Weather &
moisture resistant.
Fits the panel systems you already use.
Made to order for PERI TRIO, PERI SKYDECK, Hünnebeck TOPEC, Doka, MEVA, ULMA, NOE, Symons and more
Easy to transport and handle
Cut, drill, nail and screw like wood
Simple to maintain and repair with a patch kit
Practical on site.
Easy to repair.
Switching from plywood?
MULTIS 400+ goes into the same panels as plywood. Your frames and methods stay the same. Here's what changes.
Pictured above: Scandinavian phenolic-faced birch plywood
Up to 8× the reuse life of Scandinavian phenolic-faced birch plywood.*
| MULTIS 400+ | Scandinavian phenolic-faced birch plywood | |
|---|---|---|
| Reuses | Designed for 400+ reuses† | Around 50 (published range 20–80)* |
| Surface over repeated use | Consistent finish, pour after pour | Face wears, and the finish changes as it does |
| Water | Water absorption below 0.1% | Absorbs water |
| Swelling and delamination | None | Can swell and delaminate with repeated wetting |
| Release agent | Not needed in standard conditions | Usually applied before each pour |
| Damage | Easy to repair with a patch kit | Usually means replacing the sheet |
| Material | Wood-free, recyclable, fire-retardant | Timber |
Why Multis 400+?
Timber formwork can swell and delaminate under repeated use. Reinforced PVC formwork remains stable, delivering consistent concrete finish and lower cost per cycle.
MULTIS 400+ is engineered for high-cycle reuse where durability, repairability and capital efficiency must work together.
Formwork manufacturers and shuttering suppliers
Concrete contractors
Civil engineering & infrastructure companies
Residential & commercial builders
Equipment hire fleets / formwork hire companies across Europe
Suitable for both vertical and horizontal concrete formwork applications including walls, columns, slabs, foundations, basements and infrastructure projects.Who uses MULTIS 400+?
