⏹ Multis 400+

About

Built for real sites.

MULTIS 400+ is a reinforced PVC formwork board engineered for high-cycle concrete construction in demanding European site conditions.

Designed for 400+ reuse cycles, it maintains dimensional stability and surface consistency across repeated pours.

Stable surface.
Predictable results.

MULTIS 400+ provides a stable formwork surface for exposed, high quality architectural finishes and infrastructure concrete where consistent surface quality is required.

• No panel irregularities
• No formwork-related discolouration
• Clean element joints

MULTIS 400+ FINISHES INCLUDE:

⏹ NSCS Edition 4 / 8.6.1.4 Special Finish

⏹ NSCS Edition 4 / 8.6.1.3 Plain Finish

⏹ F3 - F7 / Highway finish requirements

⏹ C.E.S.W. Specifications

  • Close-up of a textured gray concrete wall surface.

    ⏹ NSCS Edition 4

    8.6.1.4 Special Finish

  • Close-up of a textured concrete wall with a rough surface.

    ⏹ NSCS Edition 4

    8.6.1.3 Plain Finish

  • Close-up view of a concrete surface with numerous small and large holes.

    ⏹ F3 - F7

    Highway finish requirements

  • Blank concrete wall with black paint splatters and stains.

    ⏹ C.E.S.W specifications

See in action
  • Concrete staircase with metal railing in an unfinished building

    ⏹ FIRST POUR

    Level 1 using Multis 400+

  • ⏹ LAST POUR

    Level 10 using Multis 400+

  • ⏹ FIRST POUR

    Level 1 Peri Marine Ply Hardwood

  • ⏹ LAST POUR

    Level 9 Peri Marine Ply Hardwood

See in action

High-cycle durability.

Construction worker in safety gear welding on a concrete building under construction with metal rebars protruding from the structure.

Designed for 400+ reuse cycles

⏹ Up to 8–10× longer service life than plywood

⏹ Excellent plasticity and bendability for on-site use

⏹ Consistent concrete surface finish across repeated pours

MULTIS 400+ supports long service life where repeat performance matters.

Less labour. Less waste. Lower cost per cycle.

Construction site with reinforced steel bars and wooden pallets on a concrete floor.

Significantly lower cost per pour compared with plywood.

⏹ Easy release from concrete surfaces

⏹ Release agent not required in standard applications

⏹ Quick cleaning between pours

⏹ Faster turnaround between uses or hire cycles

Reduced replacement frequency, refurbishment time and maintenance costs compared with plywood.

Weather &
moisture resistant.

Construction worker in safety gear on an orange lift working on a high concrete wall with snow on the ground below.

No swelling, warping or delamination.

⏹ Low water absorption <0.5% (ASTM D570)

⏹ Reliable in wet, cold & variable European climates

⏹ Suitable for outdoor storage

Moisture stability protects both structural integrity and surface finish.

Practical on site.
Easy to repair.

Construction site with a crane lifting a large concrete panel in the air. Workers in safety vests and helmets are on the site, and the building framework is visible with scaffolding and blue safety netting.

Made to fit existing formwork manufacturers & shuttering systems.

⏹ Lightweight, easy to transport and handle

⏹ Cut, drill, nail and screw like wood

⏹ Simple on-site repair without loss of performance

MULTIS 400+ integrates directly into established workflows without requiring system changes.

Suitable for professional concrete construction across Europe

MULTIS 400+ IS DEVELOPED FOR:

⏹ Formwork manufacturers and shuttering suppliers

⏹ Concrete contractors

⏹ Civil engineering & infrastructure companies

⏹ Residential & commercial builders

⏹ Equipment hire fleets/formwork hire companies across Europe

Suitable for both vertical and horizontal concrete formwork applications including walls, columns, slabs, foundations, basements and infrastructure projects.

Modern building with large concrete wall, window reflections, and a person standing inside near the door, with a reflection in water at the bottom.
Abstract black and gray architectural structure with curved and angular concrete surfaces, shot in monochrome.

Why Multis 400+?

Timber formwork can swell and delaminate under repeated use. Reinforced PVC formwork remains stable, delivering consistent concrete finish and lower cost per cycle.

MULTIS 400+ is engineered for high-cycle reuse where durability, repairability and capital efficiency must work together.

⏹ Order a sample

Why Choose MULTIS 400+
Decision Factor Timber Plywood MULTIS 400+ Reinforced PVC Aluminium‑Reinforced Composite
⏹ Low moisture absorption ✖ ✔ ✔
⏹ No swelling or delamination ✖ ✔ ✔
⏹ Consistent surface over repeated use ✖ ✔ ✔
⏹ Reduced release agent dependency ✖ ✔ ✔
⏹ On‑site repairable ✖ ✔ ✔
⏹ High‑cycle durability without premium capital cost ✖ ✔ ✖
Timber Plywood
  • Low moisture absorption✖
  • No swelling or delamination✖
  • Consistent surface over repeated use✖
  • Reduced release agent dependency✖
  • On‑site repairable✖
  • High‑cycle durability without premium capital cost✖
MULTIS 400+ Reinforced PVC
  • Low moisture absorption✔
  • No swelling or delamination✔
  • Consistent surface over repeated use✔
  • Reduced release agent dependency✔
  • On‑site repairable✔
  • High‑cycle durability without premium capital cost✔
Aluminium‑Reinforced Composite
  • Low moisture absorption✔
  • No swelling or delamination✔
  • Consistent surface over repeated use✔
  • Reduced release agent dependency✔
  • On‑site repairable✔
  • High‑cycle durability without premium capital cost✖

Capital positioning and performance characteristics are based on typical industry market positioning and standard site applications.

Switch to 400+

Switch to 400+